研究業績｜島根大学材料エネルギー学部榎木・唐研究室

島根大学材料エネルギー学部榎木・唐研究室

研究業績

該当する論文が見つかりませんでした。

投稿論文 (2020 以降)

2025

Thermodynamic investigation of Guinier–Preston zone formation in the Al–Cu binary system Takao Suzuki, Takahiro Yabe, Masanori Enoki, Hiroshi Ohtani Scripta Materialia, 265, 116746, (2025)

2024

Thermodynamic Analysis of the Fe-B-C Ternary System and an Evaluation of the Grain Boundary Segregation Behavior of B and C Masanori Enoki, Kota Takahashi, Hiroshi Ohtani Journal of Phase Equilibria and Diffusion, (2024)
Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review Kaveh Edalati, ... Yongpeng Tang, ... et al. Journal of Alloys and Compounds, 1002, 174667, (2024)
Relationship between Lattice Strain and Ordering Tendency in Medium-Entropy Alloys Masanori Enoki, Hiroshi Ohtani Materials Transactions, 65, 1025, (2024)
Comparison of Mechanical Properties in Ultrafine Grained Commercial-Purity Aluminum (A1050) Processed by Accumulative Roll Bonding (ARB) and High-Pressure Sliding (HPS) Yongpeng Tang, Toshiki Fujii, Shoichi Hirosawa, Kenji Matsuda, Daisuke Terada, Zenji Horita Journal of the Japan Institute of Metals and Materials, 89, 114, (2024)
Improving thermoelectric properties of Bi2Te3 by straining under high pressure: Experiment and DFT calculation Qing Wang, Yongpeng Tang, Asuka Miura, Koji Miyazaki, Zenji Horita, Satoshi Iikubo Scripta Materialia, 243, 115991, (2024)
Achieving high-Tc superconductivity in Magnéli phase based on Ti oxides: prediction by machine learning and material synthesis by high-pressure torsion processing Masaki Mito, Narimichi Mokutani, Yongpeng Tang, Kaname Matsumoto, Takayuki Tajiri, Zenji Horita Journal of Materials Science, 59, 5981, (2024)
Microstructural modification and mechanical improvement of ultrafine-grained Ti alloy through electron wind force: An innovative approach Yongpeng Tang, Yang Ju, Shaojie Gu, Qing Wang, Yasuhiro Kimura, Yuhki Toku, Satoshi Iikubo Materials Science and Engineering: A, 891, 145845, (2024)
Thermodynamic Analysis of the Formation Mechanism of Metastable Carbides during Tempering of Fe–C Martensite Masanori Enoki, Yu Sato, Hiroshi Ohtani ISIJ International, 64, 257, (2024)
Superconductivity of barium with highest transition temperatures in metallic materials at ambient pressure Masaki Mito, Hiroki Tsuji, Takayuki Tajiri, Kazuma Nakamura, Yongpeng Tang, Zenji Horita Scientific Reports, 14, (2024)

2023

Stability and Metastability of Li₃YCl₆ and Li₃HoCl₆ Hiroaki Ito, ... Masanori Enoki, ... et al. Bulletin of the Chemical Society of Japan, 69, 1262, (2023)
Comparison of Mechanical Properties in Ultrafine Grained Commercial-Purity Aluminum (A1050) Processed by Accumulative Roll Bonding (ARB) and High-Pressure Sliding (HPS) Yongpeng Tang, Toshiki Fujii, Shoichi Hirosawa, Kenji Matsuda, Daisuke Terada, Zenji Horita MATERIALS TRANSACTIONS, 64, 1902, (2023)
Enhancement of Activation and Hydrogen Storage Kinetics of TiFe(Mn) Using High-Pressure Sliding (HPS) Process Zenji Horita, Yongpeng Tang, Motoaki Matsuo, Kaveh Edalati, Manabu Yumoto, Yoichi Takizawa MATERIALS TRANSACTIONS, 64, 1920, (2023)
Ultrafine-grained AZ61 alloy produced by high-pressure torsion: Advent of superplasticity and effect of anisotropy Takahiro Masuda, Yongpeng Tang, Intan Fadhlina Mohamed, Zenji Horita Materials Science and Engineering: A, 879, (2023)
Simultaneous enhancement of strength and ductility in nonflammable Mg alloys through dynamic precipitation using severe plastic deformation under high pressure Yongpeng Tang, Shinichi Inoue, Masaki Mito, Takahiro Masuda, Yuji Higo, Yoshinori Tange, Yasuo Ohishi, Yoshihito Kawamura, Zenji Horita Materials Science and Engineering: A, 145395, (2023)
In Situ Synchrotron High-Pressure X-ray Analysis for ZnO with Rocksalt Structure Horita, Z., Tang, Y., Masuda, T., Edalati, K., Higo, Y. Materials Transactions, 64, 1585, (2023)
Current Status and Future Scope of Phase Diagram Studies Masanori Enoki, Satoshi Minamoto, Ikuo Ohnuma, Taichi Abe, Hiroshi Ohtani ISIJ International, 63, 407, (2023)
In Situ Synchrotron X–ray Analysis: Application of High–Pressure Sliding Process to Ti Allotropic Transformation Horita, Z., Maruno, D., Ikeda, Y., Masuda, T., Tang, Y., Arita, M., Higo, Y., Tange, Y., Ohishi, Y. Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 87, 56, (2023)
Mechanical Properties and Microstructures of Highly Fe-Containing AlMgSi Alloys Processed by Severe Plastic Deformation under High Pressure Tang, Y., Tomita, Y., Horita, Z. Materials Transactions, 64, 448, (2023)
Production of Ultrafine-Grained Aluminum Alloys in Upsized Sheets Using Process of Incremental Feeding High-Pressure Sliding (IF-HPS) Komatsu, T., Masuda, T., Tang, Y., Mohamed, I.F., Yumoto, M., Takizawa, Y., Horita, Z. Materials Transactions, 64, 436, (2023)
Sublattice alloy design of high-strength steels: Application of clustering and nanoscale precipitation of interstitial and substitutional solutes Tadashi Furuhara, Yongjie Zhang, Mitsutaka Sato, Goro Miyamoto, Masanori Enoki, Hiroshi Ohtani, Tokuteru Uesugi, Hiroshi Numakura Scripta Materialia, 223, 115063, (2023)

2022

Exploration of Superconductivity in Three-elements Light Metal System～Proposing Exploration Strategy and Assuming Superconducting Components by Machine Learning～ Narimichi Mokutani, Yongpeng Tang, Masaki Mito, Kaname Matsumoto, Mitsuhiro Murayama, Zenji Horita Materia Japan, 61, 870, (2022)
The interplay between the incommensurate spin correlations and superconductivity in Mn substituted La_1.90Sr_0.10CuO₄ Masaki Fujita, Masanori Enoki Journal of Physics: Conference Series, 2323, 012012, (2022)
Severe Plastic Deformation under High Pressure: Upsizing Sample Dimensions, 高圧下での巨大ひずみ加工：大量素材の製造に向けて Horita, Z., Tang, Y., Masuda, T., Takizawa, Y. Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 86, 107, (2022)
Structural and thermoelectric properties of CH₃NH₃SnI₃ perovskites processed by applying high pressure with shear strain Wang, Q., Tang, Y., Horita, Z., Iikubo, S. Materials Research Letters, 10, 521, (2022)
Preparation of faceted TaN grains by heating Ta-containing oxides in BN crucible with Na Naoya Kuge, Toru Sekiya, Masanori Enoki, Hisanori Yamane, Takahiro Yamada Ceramics International, 48, 10817, (2022)
Achieving superconductivity with higher T_c in lightweight Al–Ti–Mg alloys: Prediction using machine learning and synthesis via high-pressure torsion process Masaki Mito, Narimichi Mokutani, Hiroki Tsuji, Yongpeng Tang, Kaname Matsumoto, Mitsuhiro Murayama, Zenji Horita Journal of Applied Physics, 131, 105903, (2022)
Creep Resistance of S304H Austenitic Steel Processed by High-Pressure Sliding Petr Kral, ... Yongpeng Tang, ... et al. Materials, 15, 331, (2022)

2021

A novel ternary bismuthide, NaMgBi: crystal and electronic structure and electrical properties Takahiro Yamada, Naoki Matsuo, Masanori Enoki, Hisanori Yamane ZEITSCHRIFT FUR NATURFORSCHUNG SECTION B-A JOURNAL OF CHEMICAL SCIENCES, 76, 789, (2021)
Electron Theory Calculation of Thermodynamic Properties of Steels and Its Application to Theoretical Phase Diagram of the Fe-Mo-B Ternary System Enoki Masanori, Takahashi Kota, Mitomi Soei, Ohtani Hiroshi Tetsu-to-Hagane, 107, 923, (2021)
Phase transformations in Al-Ti-Mg powders consolidated by high-pressure torsion: Experiments and first-principles calculations Yongpeng Tang, Mitsuhiro Murayama, Kaveh Edalati, Qing Wang, Satoshi Iikubo, Takahiro Masuda, Yuji Higo, Yoshinori Tange, Yasuo Ohishi, Masaki Mito, Zenji Horita Journal of Alloys and Compounds, 889, 161815, (2021)
Sm–Ti binary thermodynamic database and phase diagram Arkapol Saengdeejing, Ying Chen, Osamu Takeda, Masanori Enoki, Satoshi Sugimoto, Hiroshi Ohtani, Abe Taichi Calphad, 75, (2021)
Influence of High Pressure Sliding and Rotary Swaging on Creep Behavior of P92 Steel at 500 °C Petr Kral, ... Yongpeng Tang, ... et al. Metals, 11, 2044, (2021)
Phase transformation and microstructure evolution in ultrahard carbon-doped AlTiFeCoNi high-entropy alloy by high-pressure torsion Parisa Edalati, Abbas Mohammadi, Yongpeng Tang, Ricardo Floriano, Masayosi Fuji, Kaveh Edalati Materials Letters, 302, 130368, (2021)
Grain refinement and superplasticity of Inconel 718 processed by Multi-Pass High-Pressure sliding Yongpeng Tang, Kaveh Edalati, Takahiro Masuda, Yoichi Takizawa, Manabu Yumoto, Zenji Horita Materials Letters, 300, 130144, (2021)
Homogeneous Strain Introduction Using Reciprocation Technique in High-Pressure Sliding Takahiro Masuda, ... Yongpeng Tang, ... et al. Metallurgical and Materials Transactions A, 52, 3860, (2021)
Powder Consolidation and Synthesis for Enhanced Mechanical Properties Using Severe Plastic Deformation under High Pressure Yongpeng Tang, Takahiro Masuda, Zenji Horita Processing of CAMRIC Forum7, (2021)
Effect of severe plastic deformation on creep behaviour and microstructure changes of P92 at 923 K P. Král, ... Y. Tang, ... et al. Metallic Materials, 59, 1741, (2021)
In Situ Synchrotron X-ray Analysis: Application of High-Pressure Sliding Process to Ti Allotropic Transformation Zenji Horita, Daisuke Maruno, Yukimasa Ikeda, Takahiro Masuda, Yongpeng Tang, Makoto Arita, Yuji Higo, Yoshinori Tange, Yasuo Ohishi MATERIALS TRANSACTIONS, 62, 167, (2021)

2020

Achieving grain refinement of upsized Al-3Mg-0.2Sc (mass%) round rods using multi-pass high-pressure sliding (MP-HPS) Tang, Y., Takizawa, Y., Yumoto, M., Otagiri, Y., Horita, Z. Keikinzoku/Journal of Japan Institute of Light Metals, 70, 63, (2020)
The effect of predeformation on creep strength of 9% cr steel Král, P., ... Tang, Y., ... et al. Materials, 13, (2020)
Thermodynamic Analysis of the Al-Mg-Zn Ternary System 林直宏, 中島一喜, 榎木勝徳, 大谷博司日本金属学会誌, 84, 141, (2020)
Electron Theory Calculation of Thermodynamic Properties of Steels and Its Application to Theoretical Phase Diagram of the Fe–Mo–B Ternary System Enoki Masanori, Takahashi Kota, Mitomi Soei, Ohtani Hiroshi ISIJ International, 60, 2963, (2020)
Thermodynamic Analysis of the Formation Process of Metastable Carbides in Iron-Carbon Martensite 榎木勝徳, 大澤洋平, 大谷博司鉄と鋼, 106, 52, (2020)
Formation and stability of solute enriched stacking fault in the MgZnY, MgCoY and MgZnCA ternary systems M. Egami, I. Ohnuma, M. Enoki, H. Ohtani, E. Abe Materials Transactions, 61, 839, (2020)
Thermodynamic Analysis of the Fe-Mo-B Ternary System 高橋宏太, 石川恭平, 藤岡政昭, 榎木勝徳, 大谷博司鉄と鋼, 106, 20, (2020)
Mechanical properties and electrical conductivity of ultrafine-grained aluminum consolidated by high-pressure sliding Yongpeng Tang, Takuya Komatsu, Takahiro Masuda, Makoto Arita, Yoichi Takizawa, Manabu Yumoto, Yoshiharu Otagiri, Zenji Horita Materialia, 14, 100916, (2020)
Considerable improvement in elastic moduli and the underlying mechanism of Al-Cu-Zn alloy subjected to aging treatments Ryota Kasama, Hideaki Iwaoka, Yuto Umeda, Tang Yongpeng, Shoichi Hirosawa, Hiroyuki Watanabe, Masashi Fujita Materialia, 14, 100911, (2020)
Thermodynamic assessment of the Ga-Se-Te system Yuheng Liu, Zhichao Dou, Masanori Enoki, Yutaka Oyama, Hiroshi Ohtani CALPHAD, 71, (2020)
Application of First Principles Calculation and Related Methods to Steels Masanori Enoki, Hiroshi Ohtani Reference Module in Materials Science and Materials Engineering, 284, (2020)
Calphad Modeling of LRO and SRO Using ab initio Data Masanori Enoki, Bo Sundman, Marcel H. F. Sluiter, Malin Selleby, Hiroshi Ohtani METALS, 10, (2020)
Ultrahigh hardness and biocompatibility of high-entropy alloy TiAlFeCoNi processed by high-pressure torsion Parisa Edalati, Ricardo Floriano, Yongpeng Tang, Abbas Mohammadi, Karina Danielle Pereira, Augusto Ducati Luchessi, Kaveh Edalati Materials Science and Engineering: C, 112, 110908, (2020)
Severe Plastic Deformation under High Pressure: Upsizing Sample Dimensions yongpeng tang MATERIALS TRANSACTIONS, 61, 1177, (2020)
Achieving Grain Refinement of Upsized Al–3Mg–0.2Sc (mass%) Round Rods Using Multi-Pass High-Pressure Sliding (MP-HPS) Yongpeng Tang, Yoichi Takizawa, Manabu Yumoto, Yoshiharu Otagiri, Zenji Horita MATERIALS TRANSACTIONS, 61, 1387, (2020)
Effect of ultrafine-grained microstructure on creep behaviour in 304L austenitic steel Petr Kral, ... Yongpeng Tang, ... et al. Materials Science and Engineering: A, 785, 139383, (2020)
Grain refinement and superplasticity of pipes processed by high-pressure sliding Tang, Y., Matsuda, K., Takizawa, Y., Yumoto, M., Otagiri, Y., Horita, Z. Materials Science and Technology (United Kingdom), 36, 877, (2020)
Thermodynamic origin of solute-enriched stacking-fault in dilute Mg-Zn-Y alloys M. Egami, I. Ohnuma, M. Enoki, H. Ohtani, E. Abe Materials and Design, 188, (2020)
Microstructures and the Mechanical Properties of the Al–Li–Cu Alloy Strengthened by the Combined Use of Accumulative Roll Bonding and Aging Yongpeng Tang, Shoichi Hirosawa, Seiji Saikawa, Kenji Matsuda, Seungwon Lee, Zenji Horita, Daisuke Terada Advanced Engineering Materials, (2020)

学会発表 (2020 以降)

（準備中）